Diagnostic trouble codes (DTC) are stored in electronic control units (ECU) when various vehicle systems malfunction and help to identify the causes of the malfunction. All stored trouble codes can only be read using compatible diagnostic adapters or scanners .
Chevrolet Malibu 9th generation was produced in 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 mainly with gasoline engines 1.5 and 2.0 . During this time, the model has been updated. In our article you will find a description of
The 3rd generation Chevrolet Equinox was produced in 2017, 2018, 2019, 2020, 2021, 2022, 2023, mainly with 1.5 and 2.0 liter gasoline engines. In this material you will find a description of the fuses and relays of the Chevrolet Equinox
Ford Expedition U324 belongs to the 3rd generation of the Ford Expedition model range and was produced in 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017. In our material you can find a description of the fuses
Ford F-150 12th generation was produced in 2009, 2010, 2011, 2012, 2013 and 2014. During this time, the model has undergone restyling. In this material we will show a description of the fuses and relays of the Ford F150 with
Ford Focus 4th generation was produced in 2018, 2019, 2020, 2021, 2022, 2023, 2024. During this time, the model has been updated. In this post you can find a description of the Ford Focus 4 fuses with block diagrams and
We consider fuses and relays in the Opel Mokka (Buick Encore) car – 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022. Fuses and relays under the hood of the Opel Mokka The mounting block in the engine
Important safety instructions Xenon lamps If your car is equipped with xenon lamps, then when the engine is started, the light cone of the xenon lamps moves from top to bottom and back. In this case, the light must be
Headlamp assembly (with halogen bulbs) Removal and installation, disassembly and assembly Removal 1. Remove the radiator grille retainer assembly. 2. Remove the front bumper panel assembly (for models with a steel bumper) (for more details, see the corresponding section in
1. Turn off the lights before replacing the bulbs. 2. Loosen the mounting bolts (A) in the area of the cabin step using a T30 Torx key. 3. Remove the plastic headlight corner trim (B). 4. Remove the mounting bolts