Fuses and relays Skoda Enyaq. Fuse diagram Skoda Enyaq.

Fuse Replacement – ​​Left-Hand Drive

1. Open the storage compartment on the driver’s side.
2. Squeeze and hold the locking tabs.
3. Open the storage compartment.
4. Replace the fuse.
5. Close the storage compartment.

Access to fuses – right-hand drive

1. Open the storage compartment on the front passenger side.
2. Loosen the storage compartment brake rod.
3. Squeeze and hold the locking tabs.
4. Open the storage compartment.

Fuse Replacement – ​​Right-Hand Drive

1. Open the fuse box cover.
2. Replace the fuse.
3. Close the fuse box cover.
4. Insert and secure the brake rod.
5. Close the storage compartment.

Fuse overview

Fuse number	Consumer
1	230 V socket
2	Airbags
3	Traction and coupling device
4	Front camera for auxiliary systems
5	Exterior lighting of the car behind
6	Interior lighting, radiator grille lighting
7	Heated front seats
8	Lift and slide roof
9	Power window (left side of the car), central locking (left side of the car), left exterior mirror (heating, folding function, mirror surface adjustment), electric child lock (left side of the car)
11	Traction and coupling device
13	Central locking (rear doors and trunk lid), windshield washer system, headlight cleaning system, headlight swivel function
14	Music amplifier
17	Rear radar sensors, parking assist, parking steering assist
18	Steering column lock, KESSY (keyless locking system), contactless trunk lid control
19	Dashboard, emergency call, online services
20	Front ports Phone box, USB
21	Rear view camera, Top View system
22	Engine management system
23	Communication system
25	Driver’s seat belt
26	Power window (right side of the car), central locking (right side of the car), right exterior mirror (heating, folding function, mirror surface adjustment), electric child lock (right side of the car)
27	Passenger seat belt on the right of the driver
28	High-voltage battery management system – safe shutdown of the high-voltage system. The fuse can only be replaced at a specialized service point.
29	Traction and coupling device
30	Information and command system
31	Traction and coupling device
32	Exterior lighting of the car at the rear, brake light located at the top of the body, license plate light
34	Heating/air conditioning
35	Rear seat heating
36	Heating/air conditioning fan
37	Electric trunk lid
38	Seat ventilation
39	Steering wheel heating
40	Alarm sound signal
41	Data bus
42	Transmission control, transmission mode display
43	Front air conditioning, rear air conditioning, heated rear window
44	Front interior lighting, parking brake, rain and light sensor, lighting function control, alarm system, diagnostic connector, dashboard keypad
45	Steering wheel control lever
46	Infotainment screen, Head-up display
47	Adaptive Chassis Control (DCC)
48	USB on the back
52	12V socket in the luggage compartment
58	USB on the back
59	Auto-dimming interior mirrors
60	Diagnostic connector
61	Drive system
66	Rear window wiper
67	Heated rear window

Skoda Enyaq relay diagram.

1. Press the locking buttons on the fuse box cover and hold them pressed.
2. Remove the cover.
3. Replace the fuse.
4. Install the cover and secure it.

NOTE

Danger of water entering the fuse box!

• Install the cover correctly and secure it securely.

Fuse overview

Fuse number	Consumer
2	ESC auxiliary system, BDM control system, new main relay
3	High-voltage battery charger, electric drive
4	Left headlight
5	Right headlight
6	Front radar sensor
9	Sound signal
10	Windshield wiper
11	Air conditioning + heating
12	Engine sound generator
13	ESC auxiliary system
15	ESC auxiliary system
16	Radiator fan
17	Heated windshield
23	Engine management system
24	Radiator fan
25	Coolant pump, electric heating
26	Coolant pump, radiator shutters
32	Brake booster